Overview Block PV Forecast

As a presentation: PV forecast - functions and benefits at a glance, for customer meetings and training (arrow keys to browse, F for full screen).

This control shows how much electricity the photovoltaic system is expected to generate today and on the next three days – as a daily total and hour by hour. For today the yield measured so far is shown alongside; the history compares yield and forecast of past days and months if recording is switched on. The control is only available in the new block design.

Operation

The tile

  1. Name and state: below the name it says “Forecast”, in case of a problem the reason in orange or red, for example “Retrieval failed” or “No location”.
  2. Today: the expected yield of the whole day in kWh, below it how much of it is still to come and the yield measured so far.
  3. Hourly bars: the forecast per hour pale, the measured yield in full colour; the dashed line is the current time.
  4. Following days: the expected yield of tomorrow and the two days after.
  5. Gear: opens the settings.

Tapping the tile opens the forecast. A small tile only shows today and tomorrow; there the settings are reached via the gear of the forecast. If -.-- is shown instead of a number, no forecast is available yet.

The forecast

  1. Days: today, tomorrow and the two following weekdays to switch between.
  2. Daily total: the expected yield of the selected day, on the right the peak power with time. For today additionally the yield still to come, the yield measured so far and the current power.
  3. Bars per hour: the yield of each hour in kWh. For today past hours are drawn as an outline of the forecast with the measured yield inside, so the deviation is visible at a glance. The dashed line is the current time, a dotted line the inverter limit.
  4. Arrow at the bottom left: switches to the history with the recorded days, months and years.
  5. Gear: opens the list with settings, key figures and reset learning.
  6. Share symbol: passes on the forecast of the selected day as a picture, as described for the history.

The forecast is retrieved every hour; on the days of the clock change the day has 23 or 25 hours.

The history

The history shows the recording of the controller. It has to be switched on in the settings; without recording the history stays empty.

  1. Period: Day and Week (the last 7 days) show the yield per hour, Month (the last 30 days) per day and Year per month.
  2. Arrows at the bottom: the left arrow goes back one period, the right arrow forward again. In the current period the right arrow leads back to the forecast.
  3. Yield: the measured yield is filled, the forecast is drawn as a line above it. Per hour it is the forecast retrieved last, per day the forecast at the start of the day. In the Month view a second line on the right axis shows the learning factor. Above the chart are the totals and the deviation in percent.

The gear allows deleting the recording after a confirmation.

The share symbol in the title bar passes on the chart as a picture, just as it is shown: on a PC the picture is then in the clipboard and can also be saved as a PNG file, on Android and iOS the share menu of the device opens. In the settings behind the gear, Export as CSV saves the displayed data as a CSV file, for example for evaluation in Excel: the selected time range, one column per line.

Key figures

Settings

Changed values are only transferred to the controller with Save; the forecast is then recalculated immediately.

Learn from yieldThe forecast compares itself every hour with the measured yield and compensates shading, soiling and deviations of the system. When switched off, the learned state is kept and still applied. Default on.
Learning rateHow strongly one hour changes the learning factor, 1 to 50 %. Small = steady but slow; large = follows quickly but varies with the weather. Default 10 %.
Adjust forecastRaises or lowers the forecast permanently by this share, −50 to +50 %, in addition to learning. Default 0 %.
Record historyStores the measured yield and the forecast per hour and per day on the controller. This is the basis of the history. When switched off, an existing recording is kept, only nothing is added. Default off.
KeepHow far back the recording reaches, 1 to 60 months (five years). Older values are dropped automatically, so the file does not keep growing. Each year takes up at most about 1.5 MB. Default 24 months.

Reset learning (via the gear of the forecast) deletes all learned factors after a confirmation; the forecast starts again without correction. Useful after a modification of the system.


Setup

This section is intended for the installer of the system.

The control is linked to a block Block PV Forecast: right-click the control and select the block. The roof surfaces are entered at the block. For the measured yield to appear, the block needs an address at the input PV power or Generation meter.

TextName of the tile. Empty = “PV Forecast”.
Background, FontColours, as long as no style is active.

See also general properties of all controls.