Block camera|
This control shows the image of a camera in the new design. The tile shows the still
image; tapping it opens the popup with the video, provided a stream is entered on the
function block. The control can only be selected in the new design. The control is linked to the function block Block camera: create the block first, then right-click the control and select the block. The addresses come from this link. |
Operation |
|
| Image tab | Shows the video or, as long as no video is running, the still image. Snapshot stores an image on the block and confirms it. Fill/Fit crops the image to the area or shows all of it. The clock button shows or hides the time in the image. The speaker button only appears if the stream has sound; sound is always off when the popup opens. Plus and Minus or Ctrl + mouse wheel zoom, a zoomed image can be moved. Fill/Fit and the time in the image are remembered per device. |
| Snapshots tab | Shows the images of the ring buffer. Tapping enlarges an image, the trash can deletes it. The button next to Delete all switches between newest and oldest first, the device remembers the choice. Delete all must be tapped a second time within four seconds. Whoever opened this tab resets the counter of new snapshots when closing the popup. |
| Gear | Opens the settings. Ring buffer sets how many snapshots the block keeps, 10 by default. It can be set up to the parameter Ring buffer maximum on the block. If the value is reduced, the oldest snapshots are deleted. |
Display |
|
| View | Tile, list or basic screen (round button on the floor plan). |
| Text | Name of the camera. |
| Name in image | On: the name is shown as a label on the image. Off: the name is shown in a header above the image. |
| Show info | Default for showing the time of the last image in the image. |
| Fullscreen | Default for Fill/Fit. On: the image fills the area and is cropped. Off: the whole image is fitted. It is never distorted. |
| Dialog size (landscape) | Width of the popup in landscape: standard, wide or fullscreen. |
Still image |
|
| Interval in s | Time between two requests of the still image, also below one second. While the video is running, no still image is requested. |
| Timeout in s | If no answer arrives within this time, the request counts as failed. After three failures in a row the control shows the fault and its reason. |
Video |
|
| Image source | Automatic: via the controller on a VPN connection, otherwise first
directly and then via the controller. Still image only: no video. Video via controller: the device only needs to reach the controller, not the camera. Video direct: the device fetches the stream from the camera itself. Over VPN, Automatic and Video via controller allow one stream per controller at a time, even with several cameras; another device shows the still image and a note in the meantime. Video direct does not count towards this. If the video fails, the still image remains and it is tried again later. HLS only works directly. |
| Direct URL | Optional. Address under which the device reaches the camera if it differs from the stream URL on the block, e.g. a port forwarding in the router. Empty: the stream URL of the block applies. Via the controller the stream URL of the block always applies. The field only appears with the image sources Automatic and Video direct. |
| Live on the tile | On: the tile shows the video as long as it is visible, intended for a permanently mounted touch panel. Over VPN the tile always shows the still image, video is then only available in the popup. For weak devices or several cameras on one page, enter the substream of the camera on the block. The field does not appear with the image source Still image only. |
Basic screen |
|
| Text below the circle | Shows the name below the round button. The field only appears in the basic screen view. |