Block music system HEOS| The function block integrates one player of a Denon or
Marantz HEOS system – a HEOS speaker, an amplifier or the HEOS part of an AV receiver:
playback, volume, mute, HEOS favorites, playlists and inputs, plus several rooms playing
together. Create one function block per player. The whole system is controlled through a single device: all function blocks with the same IP address share one connection. A device that is connected by network cable and always switched on is best suited. The system reports every change itself, there is no polling loop. The matching control is Block music system HEOS. Volume limits, alarm and presence are set there. Title, cover and favorites come directly from the system and are not on any output. Switching an AV receiver on and off and selecting its inputs outside of HEOS are not part of HEOS and not possible with this function block. |
| 1. Create the function block, enter the IP address
of a HEOS device and the name of the player as shown in the HEOS app. 2. For HEOS favorites and playlists enter the HEOS account and the password. Without an account, playback, volume, inputs and groups still work. 3. Generate addresses: all inputs except brightness and all outputs are created. 4. Drag the control onto the page and link it to the function block with a right click. If the function block does not find the player, the diagnostics show a message with the names of all players of the system. |
Inputs |
||
| ZE | Zone on/off | Optional. Not 0 starts playback, 0 stops it. A player that follows another one in a group leaves the group when switched off; otherwise the whole group stops. If the player starts from standstill, the start volume applies. Every write telegram is evaluated, with a drawn connection the change. Not linked: switching only via the control, switching times and presence. |
| LP | Volume percent | Optional. Volume 0…100 %, limited to the maximum volume. A value above 0 cancels mute. In a group the value applies to this player only. Not linked: no effect. |
| LD | Volume 4 bit | Optional. Relative adjustment (DPT 3.007): bit 3 = louder, bits 0…2 the step size (1 = 100 % to 7 = 1.5 %), 0 = stop. The volume changes in steps of 2 % every 0.3 seconds up to the limit. Not linked: no effect. |
| ST | Mute | Optional. Not 0 mutes, 0 unmutes. Every write telegram is evaluated. Not linked: no effect. |
| PL | Play | Optional. Resumes playback. Every write telegram with a value other than 0 is evaluated, with a drawn connection the change to not 0. In a group the command acts on the whole group. Not linked: no effect. |
| PA | Pause | Optional. Pauses playback, evaluated like PL. No effect without playback and on inputs. Not linked: no effect. |
| VT | Previous track | Optional. Previous track, evaluated like PL. No effect without playback. Whether a service can go back is up to the service. Not linked: no effect. |
| NT | Next track | Optional. Next track, evaluated like PL. No effect without playback. Not linked: no effect. |
| FV | Favorite | Optional. Starts the HEOS favorite with this number (1…), 0 does nothing. Every write telegram is evaluated. Requires a signed-in HEOS account. Not linked: no effect. |
| SC | Sleep minutes | Optional. Stops the player after this time, 0 cancels. A stopped player starts. The sleep timer also ends when the player is stopped otherwise and does not survive a restart of the controller. Not linked: only via the control. |
| HE | Brightness | Optional. Brightness in lux for the condition When bright / When dark of switching times and presence. Not linked: the condition is not offered, switching times and presence always act. |
| LA | Volume up 1 bit | Optional. Every pulse (value not 0) raises the volume by the step size of the parameter, at most up to the maximum volume; a muted player becomes audible again. Only acts on a player that is playing or paused. Not linked: no effect. |
| LE | Volume down 1 bit | Optional. Every pulse (value not 0) lowers the volume by the step size, at most down to 0. Otherwise like LA. |
| ZF | Shuffle | Optional. Not 0 switches the shuffle of the player on, 0 off. Not linked: no effect. |
| WH | Repeat | Optional. Not 0 repeats playback, 0 switches repeat off. If the player is set to "repeat one title", this is kept. Not linked: no effect. |
Outputs |
||
| SZ | Status zone | 1 = the player is playing or paused, 0 = it is stopped. |
| SL | Status volume | Volume of the player in percent. |
| SS | Status mute | 1 = the player is muted. |
| SP | Playing | 1 = the player is currently playing. |
| VB | Connected | 1 = the connection to the system is up and the player is known there. |
| GR | Group member | 1 = the player follows another player in a group, 0 = it plays on its own or leads the group. |
| SR | Sleep remaining | Remaining sleep time in minutes, 0 = off. |
| TX | Title text | What is playing as one text, for example for a display switch: "Artist - Title", for radio the station. Empty when the player is stopped. |
| SF | Status shuffle | 1 = shuffle is on. |
| WD | Status repeat | 1 = playback is repeated (all or one title). |
Parameter |
||
| IP address | Address of a HEOS device of the system. Empty: the function block does not connect. | |
| Player | Name of the player as in the HEOS app, case does not matter. Empty: the device with the IP address. | |
| HEOS account | E-mail address of the HEOS account. Only needed for HEOS favorites and playlists. With several function blocks on one system, the account of the first function block that has one applies. Empty: the sign-in stored on the device applies. | |
| Password | Password of the HEOS account. | |
| Debug | Writes every command, answer and event to the diagnostics. The password never appears there. | |
| Step volume up/down (%) | Step size of the inputs LA and LE in percent, 1…20. Default 5. | |